US $0.011 - 200 set
Paramtents
die locking force 25tons
Packging & Delivery
Min Order1 set
Briefing
Detailed
The machine is widely used for mass production of foundry goods made of nonferrous metal such as aluminum, zinc and copper in the industries of automobiles, motorcycles, meters and instruments, household appliance hardware of daily necessities.
Computer-programmed control, hydraulic drive; crank expanding structure; 4-rod pilot elastic stress framework; locking that is tensile, faster and reliable; hydraulic ejector for lift-out, mould thickness can be controlled by hydraulic motor; 3-step hydraulic boosting and injection system that is constant and effective; injection rate over 6M/S and minimum boosting time less than 25ms.
Computer-programmed control, hydraulic drive; crank expanding structure; 4-rod pilot elastic stress framework; locking that is tensile, faster and reliable; hydraulic ejector for lift-out, mould thickness can be controlled by hydraulic motor; 3-step hydraulic boosting and injection system that is constant and effective; injection rate over 6M/S and minimum boosting time less than 25ms.
The project | The unit | J113B | |
Die locking force | kN | 250 | |
Size of moving platen (H×V) | mm | 400×400 | |
Inner space between the bars (H×V) | mm | 240×240 | |
Thickness of die block (Min/Max) | mm | 120/320 | |
Stroke of moving platen | mm | 200 | |
Ejection stroke | mm | 50 | |
Ejection force | kN | 35 | |
Injection force | kN | 35 | |
Injection stroke | mm | 250 | |
Injection position | mm | 0, -35 | |
Diameter of shot sleeve | mm | 25 | 30 |
Dosage of fluid metal per shot (Al) | kg | 0.2 | 0.3 |
Injection pressure | MPa | 71.3 | 49.5 |
Max projecting area of casting | cm2 | 50.5 | |
Dry cycle | s | 4 | |
Pipeline pressure | MPa | 7 | |
Motor power | kW | 7.5 | |
Machine weight | kg | 2000 | |
Overall dimensions (L×W×H) | mm | 3030×1060×1300 |
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.